 |
T-Jak
The T-Jak
is your perfect companion for one person cabinet
installations. It take all the strain out
of trying to hold a wall cabinet in place
while screwing it to the wall. It quickly
adjusts from 53" to 84", so it will
handle standard height wall cabinets that
usually set at 54" to the bottom and
can be adjusted up to hold higher placed cabinets
such as over the range & over refrigerator
cabinets. Handles up to 400 lbs. |
|
 |
T-Jak Mini Brute
The
T-Jak
Mini-Brute is just right if you want to install
base cabinets first. Set the Mini-Brute on
top of you base cabinet and adjust it to the
right height to set your wall cabinet. It
adjusts from 15" to 24" and can
handle up to 400 lbs. Extensions
are available. |
|
 |
 |
Cabinet
Claw Frame Clamps
A must for the perfect cabinet installation.
The screw on the side of the clamp holds
the face frames tightly together while
the screw on the front lines them flush
with each other. Bore your pilot hole
and install the screw right through
the clamp. |
|
|
 |
Zircon
Stud Sensor
Your cabinetry must be secured to a stud wall.
The Zircon Stud Sensor accurately locates
studs through plywood, drywall, or paneling.
|
|
 |
Countersink
Drill Bit
For a professional looking installation, you
may want to countersink both the screws holding
the cabinets together at the face frames and
screws holding the cabinets to the wall. This
depends on the type of screw you are using. |
|
 |
3-Pc
Spade Bit Set
This handy 3 piece spade wood bit sets contains
a 1/2", 3/4", & 1" bit.
You will need to drill various size holes
for power cords and small water pipes to enter
the cabinet. These work good for many task. |
|
 |
Plumber's
Hole Saw Kit
For larger holes this set of bits will do
the job. You will have holes up to 2 1/4"
wide for drain pipes under sinks. You will
need various size holes for dishwasher drain
tubes and hot and cold water supplies. |
|
 |
Align-Rite
Drill Guide
Accurate alignment & centering of handles
and knobs is fast and easy with the Align-Rite
Drill Guide. It adjusts easily from drawers
to doors. It has adjustable hole centers for
handles and uses a standard 3/16" drill
bit. |
|
 |
3/8"
Cordless Compact Drill/Driver Kit
A good cordless screwdriver is essential.
There are many other
brands and models available. This
Dewalt has plenty of torque to drive
the screws. Be sure to get a compact
model that you can work with in tight
spaces. |
- Compact
and lightweight; 3.8 pounds.
- Multi-position
adjustable clutch for screwdriving
accuracy
- No
load speeds of 0-400/0-1,200 rpm
- Delivers
maximum torque of 190 in./lbs.
- One
year warranty, one year service
contract, 30 day no-risk trial
|
|
|
 |
13-Piece
Screwdriving Set in Tough Case
A high quality set of screwdriver bits
with magnetic holder |
- Philips
bit tips #1, (2) #2, #3, Slotted
bit tips: (2) #8, Square recess
bit tips, (2) #2
- 2-inch
Phillips power bit: #2, 2" Square
recess power bit: #2 Compact Mag.
Drive 3-1/2" Phillips power bit:
#2,
- 3-1/2"
Square recess power bit: #2 Maximum
durability
-
One year warranty, one year service
contract, 30 day no-risk trial
|
|
|
 |
17-Piece
Industrial Drill Bit Set
A high quality drill bit set with a
good selection of bit sizes. |
- Industrial
Grade ABS material for maximum durability
with interlocking hinge
- Bit
retention system in case keeps bits
in place
- Sliding
rubber lock keeps case closed
- Drill
Bit Sizes: (2) 1/16", 5/64", 3/32",
7/64", 1/8", 9/64", 5/32", 11/64",
3/16", 13/64", 7/32", 15/64", 1/4",
5/16", 3/8", 1/2"
-
One year warranty, One year service
contract, 30 day no-risk trial
|
|
|
 |
48"
Contractor's Aluminum Level
One of the most import aspects of a
professional installation is keeping
cabinets perfectly level. A good quality
level such as this 48" Johnson
is a must. |
- Computer
machined edges
-
Full-length magnetic strip
- Magnified
top-read window
-
Shock-protecting end caps
|
|
|
| You
will need a number of other misc. items
such as the ones listed below: |
|
- Tape
Measure
- Hammer
- Chalk
Line
|
- Belt
Sander
- Miter
Saw
- Step
Ladder
|
- Carpenter's
Square
- Wood
Shims
-
2 1/2" Screws
|
|
| Tip:
A bar of paraffin used to lubricate
the threads of the screws used in face
frames makes them much easier to install
and may prevent screw breakage. |
|
877-963-2050